Home Page  
Company Profile  
Our Products  
    Bonding Agent
    Repair Product
    Waterproofing
    Water Reducing Admixture
    Proofing Admixtures
    Concrete Plasticizer
    Concrete Admixtures
    Accelerating Water
    Acrylic Cement
Home » Products » Concrete Plasticizer » Concrete Normal Superplasticizer

Concrete Normal Superplasticizer



<< Previous   Concrete Normal Superplasticizer   Next >>

Product Code : 07

Product Specification
Concrete Normal Superplasticizer

General Description
Sigmacheme's Superplast-N is superplasricizer, high range, water reducing admixture for concrete, mortars and contains selected synthetic sulphonated naphthalene  formaldehyde condensates. Lt does not contain calcium chloride, sulphates or other potentially harmful and corrosive chemicals. It may be used with safety in concrete, mortar and griuts which may surround reinforcement, per-stressing mixes and high tensile steel strands. Sigmacheme's superplast-N can be used with all types of portland cement.

Advantages
  • Sigmacheme's superplast-N imparts extreme fluidity to cementations mixed.
  • Allows large reduction in water for mixes of normal workability.
  • Facilitates rapid placing of concrete steel reinforcement.
  • Achieves good compaction without the need for excessive vibration.
Uses
Cement particles tend to clump together to form agglomerates which do not readily disperse in water, Ordinary plasticizers have limit to the amount of  dispersant that can be added continued research ha resulted in the development of Sigmacheme's super plast which act as very powerful super plasticizer this dispersing action on cement agglomerates may be used as below

As a super plasticizer for following concrete.
Substantial increases in workability can be obtained by addition of Sigmacheme's superplast-N to a mix without increased water (Same W/C ratio that of controlled mix). Magnitude of this increase is often such that the concrete.

High strength concrete
High strength mixes can be product at normal workability and cement contest but at reduced water / cement retios. The resultant concrete is of dense and impermeable nature. For a given mix, keeping the cement consumption and workability constant upto 28% reduction in the amount of mixing water, an increase in strength of about 43% can be achieved.

Saving in cement
In a given mix keeping the water/cement ratio constant, cement reduction up to 18% can be obtain without loss of workability.

Properties
Sigmacheme's superplast-N is a non-toxic liquid.
Apperarance: Brown liquid
Specific gravity: 1.19 at 20C
PH value: 7.6
Chlorides and sulphate: Nil
Solubility in water: Completely soluble in cool water.

Dosage
250 ml to of Sigmacheme's superplast-N per 50Kg (one bag of cement) to the gauging water for flow concrete it should be added directly into the mixer, after mixing cycle just prior to placing.

Shelf Life
Up to 12 months when kept in cool, dry place in tightly sealed containers.

Packing
Available in 5 ltr., 20 ltr., 100ltr. and 200 ltr. packing.
Other Products in 'Concrete Plasticizer' category
Concrete Normal Super Plasticizer
Concrete Normal Super Plasticizer
Concrete Retarding Superplasticizer
Concrete Retarding Superplasticizer
High Performance Retarding Plasticizer
High Performance Retarding Plasticizer
High Performance Water
High Performance Water
 
<< Back
CONTACT DETAILS
Shop No. 7, Building No. 14, S.R.A. Complex, Ram Mandir, Goregaon (W), Mumbai - 400062, Maharashtra, India
Phone:91-22-26793994
Fax:91-22-26793994
Send Mail   Send SMS   
Key Personnel
Mr. Shafiqur Rahman Shaikh (Director)
Mobile:+919869017620, +919320017620

Copyright © 2011-12 by SIGMA POLYCHEM PVT. LTD. All Rights Reserved.